Inspecting Nuts and Bolts

Nuts and bolts should be checked before every event. After all, it’s that old 5 P’s saying…

A routine nut & bolt check should be done every time the body clips are off. Inspect the paint marks on all major components. If one doesn’t exist, torque to spec, and mark the bolt with a paint pen.

All major fasteners should be checked for correct seating while doing so. Not only will this help ensure the car is ready for the track but helps ensure your safety.

Include the head restraint set screws. They vibrate loose, they hold a safety device, and they are easy to walk past because they are behind you. Paint-mark them like everything else and use blue Loctite. See Warnings Before First Drive.